| Advanced Ultrasonic Phased Array Technique for the Detection of Flaws at the Dissimilar Interface of Subsea Joints and Assessment of their Criticality | Proposal | PR17010 | Oil and Gas |
| Predicting the Fatigue Crack Growth Performance of Girth Welds in Sour Service | Proposal | PR18171 | Oil and Gas |
| Fracture Toughness Testing of Steels Subject to Sour Service or Under Cathodic Protection | Proposal | PRNA 21538 | Oil and Gas |
| Avoiding Unnecessary Repairs in Pipeline Girth Welds using the new BS7910 ECA Procedure | Proposal | PR19194 | Oil and Gas |
| Improved Integrity of Welded Joints with Complex Geometry | Proposal | PR18718-1 | Oil and Gas |
| Performance Assessment of Non-Invasive Monitoring of Above Ground Storage Tank Floors Using Guided Wave Ultrasonic Monitoring | Proposal | PR19655 | Oil and Gas, Power |
| Effect of Dynamic Loading on Pitting Corrosion Susceptibility | Proposal | PR20157 | Oil and Gas |
| Materials Assessment for Supercritical CO2 Transport-II (MASCO2T-II) | Proposal | PR20124 | Oil and Gas |
| Improved Integrity of Welds in Austenitic Steels and Nickel-based Alloys | Proposal | PR19831 | Oil and Gas, Power |
| Alternatives to purging systems for closure welds in piping/pipeline systems | Proposal | PR15745 | Oil and Gas |
| CompoSurf Coating Technology for Increased Functionality of Composite Materials | Proposal | PR18444 | Aerospace |
| Assured High Integrity and Productivity for Thick Section Fabrications | Proposal | PR17539 | Power |
| Internal Diameter Laser Surface Coating | Proposal | PR17824 | Aerospace |
| Reliability of Ultrasonic Inspections Applied in Lieu of Radiography in Accordance with ASME Code Case Requirements | Proposal | PR17981 | Power |
| Advanced Ultrasonic Imaging Techniques for Aerospace Components | Proposal | PR18780 | Aerospace |
| Assessment of Advanced Imaging Techniques for Power Generation Applications | Proposal | PR19265 | Power |
| Standardised Design Guideline for Offshore Wind Turbine Support Structures | Proposal | PR18537 | Power |
| MicroComp: Microwave Processing of Composites and Adhesives | Proposal | PR17009 | Aerospace |
| VALIDWELD - Verified Approaches To Life Management And Improved Design For High Temperature Welded Construction | Proposal | PR16888 | Power |
| Performance of Guided Wave Testing for Detection and Evaluation of Flaws in Pipes and Pipelines | Proposal | PR18697 | Oil and Gas |
| Guided Wave Inspection of Drilling Risers | Proposal | PR18696 | Oil and Gas |
| Service Performance and Life Prediction of Polymer Lined Steel Pipe and Tubulars - “Polymer Lined Pipe & OCTG” | Proposal | PR17679-4 | Oil and Gas |
| HISC of Duplex Stainless Steel | Project | 20418 | Oil and Gas |
| Wet and Hyperbaric Underwater Welding | Project | 22870 | Oil and Gas |
| New Techniques for Enhanced Friction Stir Welding of Novel Joints | Project | 20519 | Aerospace, Construction |
| Further Development of the FSW Floating-Bobbin Technique | Project | 22335 | Aerospace, Marine, Rail |
| Fatigue Performance of Mooring Chains in Seawater | Project | 22116 | Oil and Gas |
| Fatigue Design Guidance for Risers in Sour Service via Full Scale Testing | Project | 20324 | Oil and Gas |
| Industry Standardisation of SENT Testing | Project | 22704 | Oil and Gas |
| Fatigue Behaviour of Lined Pipes | Project | 21710 | Oil and Gas |
| Development of Coating Technologies for High Temperature, Chlorine Induced, Corrosion Mitigation in Biomass, Waste to Energy and Other Process Plants | Project | 19977 | Power |
| High Temperature Materials and Packaging for Electronics & Sensors | Project | 22115 | Electronics |
| Procedures for Improved Fatigue Life Assessment by Prediction of Fatigue Crack Growth in a Residual Stress Field | Project | 19848 | Power |
| Advanced Arc and Laser Fabrication and Repair Welding of Nickel Superalloys | Project | 20373 | Aerospace |
| Fracture Mechanics Based Weld Flaw Acceptance Criteria for C-Mn Steel Pipelines in Sour Service (Phase 2) - Sour ECA | Project | 20252 | Oil and Gas |
| Materials Assessment for Supercritical CO2 Transport (MASCO2T) | Project | 20289 | Oil and Gas |
| Safe Specification and Operation of Plastically Strained C-Mn Steel Pipelines for Sour Service (Phase 2) | Project | 19494 | Oil and Gas |
| CRA Plastic Strain - Corrosion Resistance Alloys: Simulating Strain at Welds in Small-Scale Test Specimens for Cracking Resistance Qualification | Project | 20110 | Oil and Gas |
| Demonstration of the Resistance to Hydrogen Embrittlement of Dissimilar Joints for Subsea Applications | Project | 20601 | Oil and Gas |
| Flaw Tolerance in Pipeline Girth Welds Subjected to Axial Straining and Internal Pressure | Project | 18305 | Oil and Gas |
| Improving the Integrity Management Process for Bonded Hoses | Project | 21586 | Oil and Gas |
| Optimisation of Weld Overlay for Productivity and Corrosion Resistance | Project | 21450 | Oil and Gas |
| Design and Use of Dissimilar Joints for Subsea Applications | Completed | 17434 | Oil and Gas |
| Safe hardness levels for C-Mn and low alloy steel welds operating in mildly sour environments | Completed | 5679 | Oil and Gas |
| Corrosion fatigue of steel catenary risers in sweet production | Completed | 15474 | Oil and Gas |
| Acceptance criteria for pipe girth welds inspected using Automated Ultrasonic Testing | Completed | 13545 | Oil and Gas |
| Acceptance criteria for pitting corrosion of CRA in oil & gas production environments | Completed | 15944 | Oil and Gas |
| Avoiding intergranular stress corrosion cracking of welds in supermartensitic stainless steel | Completed | 14142 | Oil and Gas |
| Definition Of Sour Service Limits For Welded Type 316l And Cost Effective CRAs | Completed | 16170 | Oil and Gas |
| Development of automated ultrasonic inspection capability for internally clad steel risers | Completed | 15837 | Oil and Gas |
| Development of computed radiographic procedures to replace film based radiography for defect detection in welds and castings | Completed | 14628 | Oil and Gas |
| Development of fracture assessment and testing procedures for HAZ cracks | Completed | 5677 | Oil and Gas |
| Development of non-destructive techniques for the detection of defects in friction stir welds | Completed | 14732 | Oil and Gas |
| The significance of intermetallic and nitride precipitates in duplex and superduplex stainless steels | Completed | 13131 | Oil and Gas |
| Fracture control for installation methods introducing cyclic plastic strains - development of guidelines for reeling of pipelines | Completed | 12201 | Oil and Gas |
| Fatigue performance of corrosion resistant steel catenary risers | Completed | 14134 | Oil and Gas |
| ERW/HFI welded line pipe for sour service applications - Phase I | Completed | 12149 | Oil and Gas |
| Fatigue damage to offshore girth welds from low stresses in the loading spectrum | Completed | 15216 | Oil and Gas |
| Evaluation of high power fibre lasers and their performance | Completed | 15329 | Oil and Gas |
| Evaluation of the delay time before inspection for detection of hydrogen cracks -Phase III | Completed | 5687 | Oil and Gas |
| Fatigue performance of girth welds made from one side | Completed | 5680 | Oil and Gas |
| Fracture mechanics based weld flaw acceptance criteria for C-Mn steel pipelines in sour service | Completed | 16136 | Oil and Gas |
| Materials Selection for Dissimilar Joints in Subsea Hubs | Completed | 14403 | Oil and Gas |
| Friction stir welding of thin aluminium sheets | Completed | 14618 | Oil and Gas |
| Hybrid laser arc processing for improved productivity and quality | Completed | 13782 | General Fabrication, Oil and Gas |
| Optimisation of materials selection for seawater handling systems in the Arabian Gulf | Completed | 13671 | Oil and Gas |
| Optimising the properties of weldments in weldable martensitic and supermartensitic stainless steels | Completed | 12097 | Oil and Gas |
| Risk of preferential weldment corrosion of ferritic steels in CO2 containing environments | Completed | 12886 | Oil and Gas |
| Procurement of Welding Fume Data - Phase 2 | Completed | 14400 | Oil and Gas |
| Underwater in-situ repair for FPSO and semi-submersible oil rigs | Completed | 16148 | Oil and Gas |
| Raising the acceptance level for Ni in C-Mn steel welds for sour service | Completed | 16721 | Oil and Gas |
| The use of ERW/HFI welded line pipe for sour service applications - Phase II | Completed | 12953 | Oil and Gas |
| A probabilistic method for assessing brittle fracture risk in pressurised components subjected to temperatures below design | Completed | 5694 | Oil and Gas |
| Toughness Requirements for Steel for Arctic and Low Temperature Environments | Completed | 20607 | Oil and Gas |
| Factors influencing the sour corrosion fatigue behaviour of C-Mn steel catenary riser welds | Completed | 17167 | Oil and Gas |
| Further Study of Fatigue Damage to Girth Welds from Low Stresses in the Loading Spectrum | Completed | 18054 | Oil and Gas |
| Improved Welding, Inspection and Integrity of Clad Pipeline Girth Welds | Completed | 18807 | Oil and Gas |
| Corrosion Fatigue of Steel Catenary Risers in Sweet Production Conditions Phase II Inhibited, Scaling Environments | Completed | 18613 | Oil and Gas |
| Sour corrosion fatigue behaviour of girth welded clad pipe | Completed | 17304 | Oil and Gas |
| Sulphide stress cracking & preferential weld corrosion performance of welds between modified A707 and C-Mn SCR pipe | Completed | 17797 | Oil and Gas |
| Reliability of Manually Applied Phased Array Ultrasonic Inspection for Detection and Sizing of Flaws | Completed | 17546 | Oil and Gas |
| Reliability of single-sided girth weld inspection | Completed | 12202 | Oil and Gas |
| Safe specification & operation of plastically strained C-Mn steel pipelines for sour service | Completed | 16071 | Oil and Gas |
| Spiral welded pipe for oil & gas: state-of-the-art | Completed | 14460 | Oil and Gas |
| Surface inspection methods for detection of stress corrosion cracking in austenitic and duplex stainless steel | Completed | 15558 | Oil and Gas |
| The effect of notches and welds on hydrogen embrittlement stress corrosion cracking of duplex and superduplex stainless steel | Completed | 13827 | Oil and Gas |
| Validation and enhancement of long range guided wave ultrasonic testing | Completed | 15524 | Oil and Gas |
| Laser welding in thick section steel fabrication | Completed | 5685 | Oil and Gas |
| Interfacing Non-Destructive Testing with Engieering Critical Assessments as applied to pressure systems | Completed | 5656 | Oil and Gas |
| The influence of atmospheric moisture on weld hydrogen level | Completed | 5650 | General Fabrication |
| Thermally sprayed aluminium alloys for the prevention of corrosion and environmentally assisted cracking of welded corrosion resistant alloys | Completed | 16734 | Power |
| The effect of thermal cutting on the mechanical properties of structural steels | Completed | 5682 | Construction, General Fabrication, Marine |
| The joining of magnesium alloys to dissimilar materials for automotive applications | Completed | 5700 | Road Transport |
| COMELD TM, a new approach to joining of metals and composite materials for high performance applications | Completed | 15642 | Aerospace |
| Cathodic protection of ferritic-austenitic stainless steel | Completed | 5699 | Aerospace |
| FSW of thin aluminium sheets - Phase II | Completed | 15718 | Aerospace |
| Friction Stir Welding (SSFSW) for the Joining of Titanium Alloys | Completed | 17779 | Aerospace |
| High productivity arc and laser welding of titanium and titanium alloys | Completed | 17403 | Aerospace |
| Exploitation of Power Beam Welding of Thick Section Steel for Structural Applications | Completed | 17895 | General Fabrication |
| Friction stir spot welding of high strength steels for transport industries | Completed | 16958 | Aerospace |
| Assessment of Bobbin Friction Stir Welding for the Joining of Aluminium Alloys | Completed | 18887 | Construction |
| Computer Based Fatigue Analysis for Welded Joints | Completed | 16881 | Oil and Gas |
| Improved Splash and Tidal Zone Coatings for a 40-Year Design Life | Completed | 19792 | Oil and Gas |
| Friction Stir Welding of Steels | Completed | 21642 | Construction, General Fabrication, Marine, Military, Off-highway, Rail |
| Use of Long Range Guided Wave Ultrasonic Testing for Fitness-for-Service Determination of Pipelines | Completed | 19239 | Oil and Gas |
