| 1028/2012 | Preliminary Investigation into the Multi-pass Fibre Laser Welding of Thick Section Steel | C M Allen | 2012 |
| 1027/2012 | Additive Manufacture of Blisk and Guide Vanes by Friction Welding | A J Robelou and M J Russell | 2012 |
| 1026/2012 | Validation of Finite Element Models of Phased Array Ultrasonic Inspection of Small Fatigue Cracks | D Panggabean and C Carpentier | 2012 |
| 1025/2012 | Modelling and Inspection of Pipes Containing Bends Using Long-Range Guided Waves | R Sanderson | 2012 |
| 1024/2012 | Out-of-Chamber Electron Beam Welding for Thick Section C-Mn Steel | C S Punshon and A Sanderson | 2012 |
| 1023/2012 | Methods for Measurement and Prediction of Residual Stresses in Pipe Girth Welds in Clad Pipes | M Joosten, L Wei and M Gallegillo | 2012 |
| 1022/2012 | Estimation of Probability of Detection Curves for Ultrasonic Testing Based on Theoretical Simulation of the Inspection Process | C Schneider, R Sanderson, C Carpentier, C Nageswaran and L Zhao | 2012 |
| 1021/2012 | Probabilistic Assessment of Pipeline Flaws Using Response Surface Model for FEA | D Zhou and M Warwick | 2012 |
| 1020/2012 | Development of Fast Full Matrix Capture Ultrasonic Inspection using Sparse Arrays | M Weston and C Nageswaran | 2012 |
| 1019/2012 | Microwave Processing of Polymer Composites: Literature Survey and Preliminary Trials | M Kwak | 2012 |
| 1018/2012 | Carbon Nanotube Safe Removal from Water Suspension: Mitigating Health Risks | A Bahrami | 2012 |
| 1017/2012 | FSW Tool Performance and Lifetime in High Strength Aluminium | RE Andrews | 2012 |
| 1016/2012 | Corrosion Behaviour of Cold Sprayed Tantalum coatings | T Marrocco | 2012 |
| 1015/2012 | Current Welding Practice and Investigation of Weld Repair Without Post-weld Heat Treatment for Grade 91 | M Consonni | 2012 |
| 1014/2012 | Welding of CRA Clad Materials Using the Three Layer (Buffer Layer) Approach - Butt Weld Trials | R Zhou and M Gittos | 2012 |
| 1013/2012 | 5kW Yb-fibre Lasers - the Influence of Optics Selection and Process Parameters on Weld Penetration Depth in Steel | A Woloszyn | 2012 |
| 1012/2012 | Potential of Welding for Repair of Wrought Iron | C Schuhler and D Godfrey | 2012 |
| 1011/2012 | Porosity, Bead Geometry and Cracking Issues Related to Laser Welding of Alloy 718 | A Khan and P Hilton | 2012 |
| 1010/2011 | Process Parameters Influencing the Melt Profile and Deposition Rate in High Productivity Arc Welding Processes for Thick Section | V Kumar | 2011 |
| 1009/2011 | Introduction to the Measurement of the Quality of Electron Beams | A Dack | 2011 |
| 1008/2011 | Friction Stir Welding of Steel | S R Cater and J G Perrett | 2011 |
| 1007/2011 | Analysis of Vitolane® Method for the Synthesis of Methacrylate Functionalised Resins | A Taylor and L Barrett | 2011 |
| 1006/2011 | Review of Fatigue Results from Girth Welds in Risers | S J Maddox and C Johnston | 2011 |
| 1005/2011 | Hybrid Laser-MIG Welding of Aluminium Alloy Butt Joints with Adaptive Control | C M Allen | 2011 |
| 1004/2011 | Validation of CrackFirst Sensors at Ambient and Reduced Temperature | M J Doré and P J Tubby | 2011 |
| 1003/2011 | Laser Surface Modification of PEEK and PP for Improved Adhesion and Wettability | I Jones and R Shepherd | 2011 |
| 1002/2011 | Stationary shoulder friction stir welding of fillet reinforced T-butt joints in aluminum alloys | J Martin | 2011 |
| 1001/2011 | Error Reduction techniques for Region-of-Interest Computed Tomography of CFRP Composites | M Amos | 2011 |
| 1000/2011 | Strain-Based Driving Force Estimates for Circumferential Cracks in Pipe Girth Welds | M Cheaitani and W He | 2011 |
| 0999/2011 | Axial Misalignment in FAD-based Fracture Assessment of Circumferential Girth Weld Flaws | M Cheaitani and W He | 2011 |
